Roc-Works is taking off - interview with Rich Carlisle about his new Blood Red Skies compatible range of models

Interesting news. I’ve been chatting to Rich Carlisle about his new project Roc-Works. For those who may not know, Rich was one of the guys at Warlord when BRS started and was very much one of the unsung heroes that helped get Blood Red Skies where it is. He left Warlord over the Christmas \ New Year and has been involved in a number of other projects since then, however he has always been a BRS guy at heart. Anyway, long story short, he has this new BRS related project “Roc-Works” which I think will be great news for all of us. I asked him to explain a bit more about Roc-Works and what it is about for the Blood Red Skis Ready Room, but the interview took in quite a bit more than I originally expected so here it is in full. 

RichC Hi Ken, you asked for a bit about what’s coming up for roc-works.co.uk, we’ll I’ve been busy putting together a place for everyone to come and find some fantastic sculpts by several talented people; including Aidan & Rowan Boustred and Steve Toth. Production-wise I’ve decided to go along the 3dSTL route to allow those with a printer of their own to build their airforces. I can also make these aircraft to order for those without a printer.

Ready Room (err me): That’s great – I’ve already got some of Steve’s work as we did a couple of crowd funding projects (ok not big crowds!)  to have Steve design and print models – his Meteor and Ki45 were beautiful. I’ve also see Aiden and Rowans excellent Fleet Air Arm stuff. So all 1:200 and ready to accept BRS bases?

RichC – yes! and I hope to have all available BRS products including bases on the store

Ready Room so I have to ask – what’s the price point? 

RichC Prices depend on the size of aircraft (and therefor sculptors time and materials etc) so an average size fighter is £13.50 for an STL and £4.50 for a single resin model. $USD prices will be similar based on exchange rates 

Ready Room. That’s not bad at all – what are you working on ?

RichC Our first releases will be the following:  Brewster F2A Buffalo ,  Nakajima Ki-43 Hayabusa (Oscar),   Gloster Gladiator ,  Fiat CR.42 Falco ,  Dewoitine D.520 . From the 2nd August, you’ll be able to order the STL files whilst the actual resin models will be ready for release from the 17th August. More models are to come asap; including the Messerschmitt Bf 109 F Tropical, Supermarine Spitfire Mk Vb/c Tropical, North American Mustang Mk1 and a Fairey Swordfish torpedo bomber (with torpedo) I and the sculptors hope you’ll give roc-works.co.uk a look and keep an eye on our progress, we have a whole lot of aircraft we want to make including many not available in detail anywhere else.

Ready Room – I’m sensing a matched pairs theme?

RichC Partially, I had a wish list we (sculptors) talked priorities and it came together. We wanted Italians and Aidan had the Cr42 and already had a Gladiator. Whilst Steve was working on a Spitfire and we added the Bf109F to match it but mainly to fill gaps we think are needing filling

Ready Room – You mentioned Italians – is that going to be a thing?

RichC There are definitely a couple more that I'd like to do, some are already planned by Warlord (SPOILER ALERT - ITALIANS ARE A THING!)  So yes, I want to look at those smaller airforces and aircraft that are often overlooked.

Ready Room – Will the stls come with printing recommendations – angles , supports etc?

RichC The STL come with several files. Firstly the STL sculpt but also that sculpt pre laid up (Sprued) and saved as 2 types of common printer files. Lastly as a ChiTuBox workable file with spruces so you can see how it’s been approached. Oh and we’ll include a guide on the website

Ready Room – nods wisely (not sure I understand that but I’m sure it makes sense to people with 3d printers)

Ready Room – any plans for bigger planes?

RichC Bigger planes, absolutely. We may start with twin engined bombers initially and I’d love to see the first of them later this year. But first things first. Let’s see if people want them   

So if people are interested in new BRS compatible “stuff” get your names on the newsletter list for RocWorks at https://roc-works.co.uk

For the TLDR brigade here is the short version

New UK manufacturer of BRS compatible models

Available as either print your own or physical models

On sale 2nd August for stls and 17th August for physical models

How good is that 😊