Sunday 3 May 2015

I suppose the name should have warned me - Dropzone Commander Resistance Leviathan Hovercraft

Names are not a reliable indicator. Take this as an example


This is the Douglas TBD "Devastator" torpedo bomber of WW2 vintage. It was never really going to live up to the name - partly because US torpedos were generally awful at the time, but mostly because it was pretty crap. 41 attacked the Japanese fleet at Midway, only 6 survived and they achieved no hits. To be fair they were so easy to shoot down the Japanese fighters were all drawn down to the turkey shoot and the US dive-bombers got a free run in and changed the direction the war in the Pacific was heading. Incidentally the pic is of the cover of the Airix box - nostalgia strikes again :-)

So when I saw the Leviathan hovercraft from Hawk Wargames I was not immediately overawed. This is the stock shop pic and it doesn't give much of an impression of size

Sure it looks a bit bigger than this - the Kraken, which is the other hovercraft the Resistance use


Then I stuck one together, and frankly it is HUGE! Pictures say a thousand words etc so here is my latest addition after being stuck together, posed artistically with a Hannibal Heavy Tank, and a Kraken. I'll try and get a better lit shot later but this gives a reasonable impression of the size of the thing!



For such a big model it went together very well. The resin parts needed careful cleaning and trimming but the fit on the whole was pretty tight. I may use some Greenstuff on some of the joints, then again I may get away without it. Dry runs before assembly are the order of the day - particularly as if you want to have the ramps operate you need to fit one hinge, then the door, then the other hinge in that order as the ramp itself will not clip in (as I first thought). The lack of instructions is probably the only minor point against this model, and even then it is self evident what goes where just by looking at the box. There are 21 parts in the model - technically 25 as you get alternate weapon options of AA guns or rocket launchers and all of them were clean cast with no bubbles and minimal flash, but you do need to take care cleaning the areas where the pour hole or vent has been. Luckily the resin is easy to work with, a sharp knife and emery board (stolen from Mrs R) were enough. Detail is phenomenal, which is pretty much what we have come to expect from Hawk.

If there is a problem with the Leviathan, it's the price. as one will set you back £35 RRP, which is a reasonable chunk. I wouldn't get one if I were just starting out, but then again if you are starting out your Resistance army wont have either 24 Technicals or 12 Trucks to move around, so you wont need one. Actually that may be a fairly big restriction on the Leviathan, as most Resistance armies I have seen don't go for big truck or technical units, but rather prefer to use the more resilient ex military stuff.

Ok there is another problem too - at just about six inches wide you may find some streets too narrow to get the damned thing down! On the plus side the Leviathan offers Resistance players a great way to move a lot of otherwise vulnerable units at reasonable speed, and also comes with some pretty serious AA or artillery support functions too. Great model - can't wait to get it painted.

3 comments:

  1. Skullsword used a Thunderstorm (which is the same same model as the Leviathan) at our tourney on the weekend, and even on the most congested board found enough space to wiggle it around. I thought the size might hinder it to begin with, but as it turns out it is okay!

    ReplyDelete
    Replies
    1. That's interesting. I'm struggling to get mine painted - just too many projects at the moment but as soon as I do I will report back.

      Delete